|Place of Origin:||Cangzhou, China|
|Minimum Order Quantity:||1set|
|Packaging Details:||Wrapped with film|
|Delivery Time:||2.5-3months after deposit|
|Payment Terms:||T/T, L/C, Western Union|
|Supply Ability:||20sets per year|
|Usage:||Production Line For Producing Corrugated Board||Working Width:||1400-2500mm|
|Cardboard Layers:||2 / 3 / 5 / 7ply As Customer Need||Flute Type:||A / C / B / E Flute As Your Need|
|Design Speed:||120m/min.||Economic Speed:||80-100m/min.|
|Automation:||Automatic||Engineer Service:||Engineer Can Install And Train Overseas|
|Voltage:||220 / 380 / 415 / 400 V||Warranty:||One Year|
5 Layers Corrugated Paper Board Production Line For Sheet Making 1600MM
I. General introduction
This line is the special equipment for corrugated board production.It mainly includes paper holder,single facer,conveyor bridge,glue machine,double facer,slitter,cut-off,stacker,and steam(or oil)heating system and glue preparing and supplying system.We offer corrugated lines of advanced,medium and simple level,for single wall,double wall and triple wall board production,with speeds varying from40 m/min to 200 m/min.,widths available from 1400mm to 2500mm.
II. Line composition
Design speed: 120m/min. Economic speed: 100m/min. for 3-layer sheet
80m/min. for 5-layer sheet
|ES-B Electric Mill Roll Stand||Φ1400mm||Welding model, with expansion clip and pneumatic brake||5|
|Rails & Trolley||Standard||10|
|2||SF-DW10S Single Facer||Φ280mm||With alloy steel flute rollers, variable-frequency motor, with gluing width electrically adjusted||2|
|3||TO-B Dual-layer Overbridge||Adsorbed type and deviation electrically corrected||1|
|4||PH-B Single-roller Pre-heater||Φ600mm||With wrap angles electrically adjusted||4|
|5||PH-B Three-roller Pre-heater||Φ600mm||With wrap angles electrically adjusted||1|
|6||PM-C Dual-roller Pasting Machine||Φ210mm||With shaft loading||1|
|DF-C Double Facer||30″standard channel and hot plate 600mm×12pcs||With intensive pressure roller, pressure shaft hydraulic lifting, 2 piece of cotton belts, universal joint drive, cooling part: 4m||1|
Electrical type online slitter
4blades 6scorers, electrical blades, manual scorers
|9||SC-B Straight-knife Cut Off||Φ188mm||Standard||1|
|10||RF-A Square Output Machine||Standard||1|
|11||Glue Making System||Standard||1|
|Air Source System||
Steam Tank 0.6m³
|Air Storage System||With pressure meter and air-water separator|
1. Q: Are you the trader or manufacturer?
A: We are the manufacturer with export qualification.
2. Q: Do you make OEM?
A: Yes, we can do.
3. Q: Where are your factory located in ?
A: We are in Dongguang town, Cangzhou city, Hebei ,China.
4. Q: Where is the nearest airport of factory ?
A: The nearest airport is in Tianjin,Jinan and Beijing. It take 4 hours from Beijing to Dongguang by car.
5. Q: Where is the nearest high-speed train station? How long from high speed train to factory ?
A: Cangzhou West station is the nearest one,from Beijing to Cangzhou ,take 1 hour.
6. Q: What is your business process?
A: Talking about clients requirements, confirm machines,make sales contract,pay for deposit, supplier arrange production, finish producing machines,buyer test machines, buyer pay for the balance payment,supplier load and ship machine.
7. Q: How to control machine quality ?
A: 1. Our company have strict quality control system from production to delivery since we already established for 23 years.
2. All material are environmental protection,non-pollution.
3. We have professional technician for supervising to production.
4. Have professional department to examine about every production process.
8. Q: Engineer can go abroad for debugging machine?
A: Our engineers can go abroad for debugging machine,buy need buyer to bear the engineers round trip ticket,room and board, 100usd/day for salary.
Contact Person: Catherine