|Place of Origin:||Cangzhou, China|
|Minimum Order Quantity:||1set|
|Packaging Details:||Wrapped with film|
|Delivery Time:||2.5-3months after deposit|
|Payment Terms:||T/T, L/C, Western Union|
|Supply Ability:||20sets per year|
|Usage:||Corrugation Machine For Producing Cardboard Sheet||Working Width:||1400-2500mm|
|Flute Type:||A / C / B / E Flute As Your Need||Design Speed:||180m/min.|
|Engineer Service:||Engineer Can Install And Train Overseas||Voltage:||220 / 380 / 415 / 400 V|
|Warranty:||One Year||Electrics:||Schneider / CHINT / DELTA, Etc|
5 / 7 Layers Corrugated Cardboard Production Line For Sheet Making 1800MM
I. General introduction
This line is the special equipment for corrugated board production.It mainly includes paper holder,single facer,conveyor bridge,glue machine,double facer,slitter,cut-off,stacker,and steam(or oil)heating system and glue preparing and supplying system.We offer corrugated lines of advanced,medium and simple level,for single wall,double wall and triple wall board production,with speeds varying from40 m/min to 200 m/min.,widths available from 1400mm to 2500mm.
II. Line composition
Design speed: 180m/min. Economic speed: 150m/min. for 3-layer sheet
120m/min. for 5-layer sheet
|Hydraulic Mill Roll Stand||Φ1600mm||Welding model, with expansion clip and pneumatic brake||5|
|Rails & Trolley||Standard||10|
|2||Single Facer||Φ320mm||With alloy steel flute rollers, variable-frequency motor, with gluing width electrically adjusted||2|
|3||TO-B Dual-layer Overbridge||Adsorbed type and deviation electrically corrected||1|
|4||PH-C Single-roller Pre-heater||Φ1000mm||With wrap angles electrically adjusted||4|
|5||PH-B Three-roller Pre-heater||Φ1000mm||With wrap angles electrically adjusted||1|
|6||PM-C Dual-roller Pasting Machine||Φ210mm||With shaft loading||1|
|DF-C Double Facer||30″standard channel and hot plate 600mm×16pcs||With intensive pressure roller, pressure shaft hydraulic lifting, 2 piece of cotton belts, universal joint drive, cooling part: 4m||1|
Computerized online slitter
4blades 6scorers, electrical blades, manual scorers
|9||SC-B Helical-knife NC Cut Off||Φ188mm||Standard||1|
|10||Basket type stacker||Standard||1|
|11||Glue Making System||Standard||1|
|Air Source System||
Steam Tank 0.6m³
|Air Storage System||With pressure meter and air-water separator|
1. Q: Are you the trader or manufacturer?
A: We are the manufacturer with export qualification.
2. Q: Do you make OEM?
A: Yes, we can do.
3. Q: Where are your factory located in ?
A: We are in Dongguang town, Cangzhou city, Hebei ,China.
4. Q: Where is the nearest airport of factory ?
A: The nearest airport is in Tianjin,Jinan and Beijing. It take 4 hours from Beijing to Dongguang by car.
5. Q: Where is the nearest high-speed train station? How long from high speed train to factory ?
A: Cangzhou West station is the nearest one,from Beijing to Cangzhou ,take 1 hour.
6. Q: What is your business process?
A: Talking about clients requirements, confirm machines,make sales contract,pay for deposit, supplier arrange production, finish producing machines,buyer test machines, buyer pay for the balance payment,supplier load and ship machine.
7. Q: How to control machine quality ?
A: 1. Our company have strict quality control system from production to delivery since we already established for 23 years.
2. All material are environmental protection,non-pollution.
3. We have professional technician for supervising to production.
4. Have professional department to examine about every production process.
8. Q: Engineer can go abroad for debugging machine?
A: Our engineers can go abroad for debugging machine,buy need buyer to bear the engineers round trip ticket,room and board, 100usd/day for salary.
IV. Detailed photos
Contact Person: Catherine